Stand-Alone Compact-Size Fingerprint Access Control Reader
SF-3000SM: Mifare format (13.56MHz)
SF-3000SMF: Mifare SOCA format (13.56MHz)
SF-3000SMH:Mifare SOCA V.2 format (13.56MHz)
Optical-based recognition device:
Durable optical-based reader head.
False Reject Rate (FRR): 0.1%; False Accept Rate (FAR) less than 1/100,000.
Latent fingerprints will be deleted with newly added fingerprint.
Sensing area: 15.6mm x 17.8mm; Resolution of 500dpi.
No ID or button pressing necessary for scanning and auto-matching fingerprint.
Optional external keypad to set Fingerprint’s stand-alone operation.
Suitable for home or office use.
200 fingerprints capacity. Each user can register 3 separate sets of fingerprints in case of any injured fingers unable to recognize when register. Each fingerprint has to be enrolled twice to enhance its precision rate and the last fingerprint enrolled is set as anti-duress fingerprint.
Four door open methods:
? Proximity and fingerprint matching
? Fingerprint matching
? Proximity card
? Push button door
3 LED lights (Red: POWER, Green: OK, Yellow: DENY).
Optional external keypad to set single card proximity entry, single card number entry, and single card deletion.
Anti-tampered. Siren will be activated when it is being vandalized. Fingerprint sensor glass is made of tampered glass which sustains major scratches (hardness of 7 and above).
Door detection point. Set door close delay time (sec) and alarm will be activated when door close delay time exceeds set time.
Built-in card reader mode with maximum of 200 cards storage. Frequency: 13.56MHz.
Standard Weigand output. It is able to switch to Weigand 26/34 Bit output when matching with controller.
Maximum proximity distance:5cm(13.56MHz) (proximity distance might be different depending on the type of card use).
Stand-alone: 150mA ; Operation: 350mA
Operation temperature: 0~60? ; Humidity: 85%Rh max.
Dimensions: SF-3000 : 143L x 72W x 59H (mm) / SF-2000P : 190L x 140W x 30H (mm)