CL600 & CL605 Front and Back Plates

2018-11-14T16:17:53+00:00พฤศจิกายน 9th, 2018|CODELOCK|

Front and back plates only for use with existing mortice latch or lock. The existing lock must have either a fixing hole (22mm) below follower (spindle) or two horizontal holes either side of the follower (38mm centres).

Quick Code change!

The CL600 range incorporates the new Quick Code system which allows on door code change in seconds. Typically most mechanical digital locks require the lock to be removed from the door or partly disassembled to change the code.

Internal doors and external doors
Front and Back Plates only – for use with existing mortice latch or lock
Quick Code change – no need to remove lock from door
Over 8000 code combinations
Lever handle lock for doors hung on the left or right
Available in brushed steel and polished brass
Use in offices / schools / warehouses / hospitals / care homes / nurseries / hotels / leisure facilities / the home
Tested to Grade 2 – ANSI – A156.2
Supplied with a random code commencing with the ‘C’ clear button. The code is non sequential, that is the code can be entered in any order e.g. 1234 can be 4321 or 1342 or whatever is the most convenient sequence. With the 13 buttons a total of 8,191 different codes are available, any of which may be entered in any order. The CL600 range has been designed so that the code can be changed on the door in seconds.

IMPORTANT: Before ordering a Codelocks Front/Back plate set for use on an existing lock case, the current lock case must be tested to ensure it is compatible. Click here for instruction.

* CL600/605 does not require a separate installation template. Please use the neoprene seal that comes with the product. Download instructions opposite for full installation guide.

Brand: Codelocks
Body Material: Zinc Alloy
Codes: 8,191 non sequential codes available
Code free option: CL605
Code change method: On door via key
Code in / code out: No
Code storage: Single code
Door thickness: 35mm – 60mm (1 3/8″ – 2 3/8″)
Keying alike: Locks can be supplied as keyed alike on request
Key cylinder change: From lock front (6 pin)
Key override: As standard the lock has a key override function
Non handed: Lock will fit doors hung on the left or right
Spindle type: 2 part 8mm (5/16″) spring loaded spindle
Suitable for: Internal and external use
Type: Front & backplates only