The CL2210 is a medium duty electronic lock. The outside knob turns freely without operating the latchbolt. When a valid code is entered and the blue LED lights burn, the knob will retract the latchbolt. The key will open the door for management functions. Code Free Mode can be programmed at the keypad using the Master Code.
Mortice deadbolt
Rapid retrofit for basic single code mechanical locks
On door programming via Master Code in seconds
Allows up to 80 User Codes
Allows up to 10 One-Time User Codes
Over 80,000 operations from 2 x AA cells (supplied)
Non handed
PVD low maintenance finish
Key override as standard
The lock can store up to 80 different User Codes. Codes may be 4, 5 or 6 digits long. Programming is via the keypad, using the Master Code. The lock has fitted as standard two alarm release terminals:
REM1 is used to open the lock from a reception desk button or answer phone
REM2 can be linked to an alarm system which, when activated by a momentary contact, will release the door for 30 minutes.This allows emergency personnel to enter the room to rapidly check that no one has been trapped and overlooked
Brand: Codelocks
Body Material: Zinc Alloy
Buttons: Individual, stainless steel
Code free option: Yes
Door thickness: 35mm – 60mm (1 3/8″ – 2 3/8″)
Finish: Brushed steel, polished brass
Keying alike: Locks can be supplied as keyed alike on request
Key override: Yes
Non handed: Lock will fit doors hung on the left or right
Power: 2 x 1.5v AA cells
Spindle type: Flat bar spindle & 8mm square adaptor
Suitable for: Internal and external use
Type: Mortice deadbolt
Operations: 80,000
